View MOC8104_3130468.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

?006 fairchild semiconductor corporation 1 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers september 2006 cny171, cny172, cny173, cny174, cny17f1, cny17f2, cny17f3, cny17f4, moc8101, moc8102, moc8103, MOC8104, moc8105, moc8106, moc8107, moc8108 phototransistor optocouplers features ul recognized (file # e90700) vde recognized ?add option v for white package (e.g., cny17f2vm) ?file #102497 ?add option ?00 for black package (e.g., cny17f2300) ?file #94766 current transfer ratio in select groups high bv ceo ?0v minimum (cny17x/m, cny17fx/m, moc8106/7/8) closely matched current transfer ratio (ctr) minimizes unit-to-unit variation. ve ry low coupled capacitance along with no chip to pin 6 base connection for minimum noise susceptability (cny17fx/m, moc810x) applications po w er supply regulators digital logic inputs microprocessor inputs appliance sensor systems industrial controls description the cny17, cny17f and moc810x devices consist of a gallium arsenide ired coupled with an npn phototransistor in a dual in-line package. white package (-m suf?) black package (no -m suf?) schematic 6 1 6 1 6 1 6 1 6 6 1 1 cny17f1/2/3/4 cny171/2/3/4 1 2 6 5 collector collector 4 emitter nc nc nc anode cathode 3 1 2 6 5 4e mitter base anode cathode 3 cny17f1m/2m/3m/4m moc8101/2/3/4/5/6/7/8 cny171m/2m/3m/4m
2 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers absolute maximum ratings symbol parameters device value units tot al device t stg storage temperature m -40 to +150 ? non m -55 to +150 t opr operating temperature m -40 to +100 ? non m -55 to +100 t sol lead solder temperature all 260 for 10 sec ? p d t otal device power dissipation @ 25? (led plus detector) derate linearly from 25? m 250 mw non m 250 m 2.94 mw/? non m 3.30 emitter i f continuous forward current m 60 ma non m 100 v r reverse voltage all 6 v i f (pk) forward current - peak (1 ? pulse, 300 pps) m 1.5 a non m 1.0 p d led power dissipation 25? ambient derate linearly from 25? m 120 mw non m 150 m 1.41 mw/? non m 1.8 detector i c continuous collector current all 50 ma v ceo collector-emitter voltage cny17x/m, cny17fx/m, moc8106/7/8 70 v moc8101/2/3/4/5 30 v v eco emitter collector voltage all 7 v p d detector power dissipation @ 25? derate linearly from 25? m 150 mw non m 150 m 1.76 mw/? non m 2.0
3 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers electrical characteristics (t a = 25? unless otherwise speci?d.) (1) isolation characteristics note: * 5300 vac(rms) for 1 minute equates to approximately 9000 vac (pk) for 1 second ** typical values at t a = 25? individual component characteristics symbol parameters test conditions device min. typ. max. units emitter v f input forward voltage i f = 60ma cny17fx/m cny17x/m 1.0 1.35 1.65 v i f = 10ma moc810x 1.0 1.15 1.50 c j capacitance v f = 0 v, f = 1.0mhz all 18 pf i r reverse leakage current v r = 6 v all 0.001 10 ? detector bv ceo breakdown voltage collector to emitter i c = 1.0ma, i f = 0 moc8101/2/3/4/5 30 100 v moc8106/7/8 cny17f1/2/3/4/m cny171/2/3/4/m 70 100 bv cbo collector to base i c = 10?, i f = 0 cny171/2/3/4/m 70 120 bv eco emitter to collector i e = 100?, i f = 0 all 7 10 i ceo leakage current collector to emitter v ce = 10 v, i f = 0 all 1 50 na i cbo collector to base v cb = 10 v, i f = 0 cny171/2/3/4/m 20 na c ce capacitance collector to emitter v ce = 0, f = 1mhz all 8 pf c cb collector to base v cb = 0, f = 1mhz cny171/2/3/4/m 20 pf c eb emitter to base v eb = 0, f = 1mhz cny171/2/3/4/m 10 pf symbol characteristic test conditions device min. typ.** max. units v iso input-output isolation voltage f = 60 hz, t = 1 min., i i-o 2? (4) black package 5300 vac(rms)* f = 60 hz, t = 1 sec., i i-o 2? (4) ? white package 7500 vac(pk) r iso isolation resistance v i-o = 500 vdc (4) all 10 11 ? c iso isolation capacitance v i-o = , f = 1mhz (4) black package 0.5 pf ? white package 0.2
4 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers transfer characteristics (t a = 25? unless otherwise speci?d.) (1) symbol dc characteristics test conditions min. typ. max. units coupled (ctr) (2) output collector current moc8101 i f = 10ma, v ce = 10v 50 80 % moc8102 73 117 moc8103 108 173 MOC8104 160 256 moc8105 65 133 moc8106 50 150 moc8107 100 300 moc8108 250 600 cny17f1/1m i f = 10ma, v ce = 5v 40 80 cny17f2/2m 63 125 cny17f3/3m 100 200 cny17f4/4m 160 320 cny171/1m 40 80 cny172/2m 63 125 cny173/3m 100 200 cny174/4m 160 320 v ce(sat) collector-emitter saturation voltage cny17xm/fxm i c = 2.5ma, i f = 10ma 0.4 v moc8101/2/3/4/5/6/7/8 i c = 500?, i f = 5.0ma cny17x/fx i f = 10ma, i c = 2.5ma 0.3 v symbol ac characteristics (3) t est conditions min. typ.* max. units non-saturated switching time t on tu r n-on time moc8101/2/3/4/5 i c = 2.0ma, v cc = 10v, r l = 100 ? 220 s moc8106/7/8 cny17x/fx 10 t off tu r n-off time moc8101/2/3/4/5 i c = 2.0ma, v cc = 10v, r l = 100 ? 320 moc8106/7/8 cny17x/fx 10 t d delay time cny17xm/fxm i f = 10ma, v cc = 5v, r l = 75 ? 5.6 ? t r rise time all devices i c = 2.0ma, v cc = 10v, r l = 100 ? 1s cny17xm/fxm i f = 10ma, v cc = 5v, r l = 75 ? 4.0 t s storage time cny17xm/fxm i f = 10ma, v cc = 5v, r l = 75 ? 4.1 ? t f f all time all devices i c = 2.0ma, v cc = 10v, r l = 100 ? 2 ? cny17xm/fxm i f = 10ma, v cc = 5v, r l = 75 ? 3.5
5 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers ** all typicals at t a = 25? notes: 1. always design to the specied minimum/maximum electrical limits (where applicable). 2. current transfer ratio (ctr) = i c /i f x 100%. 3. for test circuit setup and waveforms, refer to figures 20. 4, for this test, pins 1 and 2 are common, and pins 4 are 5 are common. transfer characteristics (continued) (t a = 25? unless otherwise speci?d.) (1) symbol ac characteristics (3) t est conditions min. typ. max. units saturated switching times t on tu r n-on time cny171/f1 i f = 20ma, v ce = 0.4v 5.5 ? cny172/f2 cny173/f3 cny174/f4 i f = 10ma, v ce = 0.4v 8.0 t r rise time cny171/f1 i f = 20ma, v ce = 0.4v 4.0 ? cny172/f1 cny173/f3 cny174/f4 i f = 10ma, v ce = 0.4v 6.0 cny171m/f1m i f = 20ma, v cc = 5v, r l = 1k ? 4.0 cny172m/3m/4m cny17f2m/f3m/f4m i f = 10ma, v cc = 5v, r l = 1k ? 6.0 t d delay time cny171m/f1m i f = 20ma, v cc = 5v, r l = 1k ? 5.5 ? cny172m/3m/4m cny17f2m/f3m/f4m i f = 10ma, v cc = 5v, r l = 1k ? 8.0 t off tu r n-off time cny171/f1 i f = 20ma, v ce = 0.4v 34 ? cny172/f2 cny173/f3 cny174/f4 i f = 10ma, v ce = 0.4v 39 t f f all time cny171/f1 i f = 20ma, v ce = 0.4v 20 ? cny172/f2 cny173/f3 cny174/f4 i f = 10ma, v ce = 0.4v 24 cny171m/f1m i f = 20ma, v cc = 5v, r l = 1k ? 20.0 ? cny172m/3m/4m cny17f2m/f3m/f4m i f = 10ma, v cc = 5v, r l = 1k ? 24.0 t s storage time cny171m/f1m i f = 20ma, v cc = 5v, r l = 1k ? 34.0 ? cny172m/3m/4m cny17f2m/f3m/f4m i f = 10ma, v cc = 5v, r l = 1k ? 39.0
6 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers fig.1 normalized ctr vs. forward current (black package) fig.2 normalized ctr vs. forward current (white package) i f - forward current (ma) i f - forward current (ma) 0510 15 20 normalized ctr 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 v ce = 5.0v t a = 25?c normalized to i f = 10 ma 02468101214161820 normalized ctr 0.0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 v ce = 5.0v t a = 25?c normalized to i f = 10 ma fig. 3 normalized ctr vs. ambient temperature (black package) fig. 4 normalized ctr vs. ambient temperature (white package) -75 -50 -25 0 25 50 75 100 125 normalized ctr 0.4 0.6 0.8 1.0 1.2 1.4 1.6 normalized to i f = 10 ma t a = 25?c i f = 10 ma i f = 20 ma t a - ambient temperature (?c) t a - ambient temperature (?c) -60 -40 -20 0 20 40 60 80 100 normalized ctr 0.2 0.4 0.6 0.8 1.0 1.2 1.4 i f = 5 ma i f = 5 ma i f = 10 ma i f = 20 ma normalized to i f = 10 ma t a = 25?c fig. 5 ctr vs. rbe (unsaturated) (black package) fig. 6 ctr vs. rbe (unsaturated) (white package) r be - base resistance (k ?) r be - base resistance (k ?) normalized ctr ( ctr rbe / ctr rbe(open) ) normalized ctr ( ctr rbe / ctr rbe(open) ) 10 100 1000 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 i f = 20 ma i f = 10 ma i f = 5 ma v ce = 5.0 v 10 100 1000 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 v ce = 5.0 v i f = 20 ma i f = 10 ma i f = 5 ma
7 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers fig. 9 switching speed vs. load resistor (black package) r-load resistor (k ?) 0.1 1 10 100 switching speed - (?) 0.1 1 10 100 1000 t off t on t f i f = 10 ma v cc = 10 v t a = 25?c fig. 7 ctr vs. rbe (saturated) (black package) fig. 8 ctr vs. rbe (saturated) (white package) t r switching speed - (?) fig. 10 switching speed vs. load resistor (white package) r-load resistor (k ?) 0.1 1 10 100 0.1 1 10 100 1000 t off t on t f i f = 10 ma v cc = 10 v t a = 25?c t r r be - base resistance (k ?) r be - base resistance (k ?) r be - base resistance (k ?) r be - base resistance (k ?) normalized ctr ( ctr rbe / ctr rbe(open) ) normalized ctr ( ctr rbe / ctr rbe(open) ) 10 100 1000 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 v ce = 0.3 v i f = 5 ma i f = 10 ma i f = 20 ma 10 100 1000 0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 i f = 20 ma i f = 10 ma i f = 5 ma v ce = 0.3 v 10 100 1000 10000 100000 normalized t on - (t on(r be ) / t on(open) ) normalized t on - (t on(r be ) / t on(open) ) 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 fig. 11 normalized t on vs. r be (black package) fig. 12 normalized t on vs. r be (white package) 10 100 1000 10000 100000 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 v cc = 10 v i c = 2 ma r l = 100 ? v cc = 10 v i c = 2 ma r l = 100 ?
8 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers 10 100 1000 10000 100000 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 r be - base resistance (k ?) 10 100 1000 10000 100000 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 v cc = 10 v i c = 2 ma r l = 100 ? v cc = 10 v i c = 2 ma r l = 100 ? normalized t off - (t off(r be ) / t off(open) ) normalized t off - (t off(r be ) / t off(open) ) fig. 13 normalized t off vs. r be (black package) r be - base resistance (k ?) fig. 14 normalized t off vs. r be (white package) i f - led forward current (ma) v f - forward voltage (v) fig. 16 led forward voltage vs. forward current (white package) 110100 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 t a = 25 c t a = -55 c t a = 100 c i f - led forward current (ma) v f - forward voltage (v) fig. 15 led forward voltage vs. forward current (black package) 110 100 1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 t a = 25 c t a = -55 c t a = 100 c 0.01 0.1 1 10 0.001 0.01 0.1 1 10 100 i f = 5 ma i f = 20 ma i f = 10 ma fig. 18 collector-emitter saturation voltage vs collector current (white package) i c - collector current (ma) v ce (sat) - collector-emitter saturation voltage (v) i f = 2.5 ma t a = 25 ?c fig. 17 collector-emitter saturation voltage vs collector current (black package) i c - collector current (ma) v ce (sat) - collector-emitter saturation voltage (v) 0.01 0.1 1 10 0.001 0.01 0.1 1 10 100 i f = 2.5 ma t a = 25 ?c i f = 20 ma i f = 10 ma i f = 5 ma
9 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers figure 20. switching time test circuit figure 21. switching time test circuit r l i f i c v cc output (v ce ) input input pulse output pulse t on t off t r t d t f t s 10% 90% fig. 19 dark current vs. ambient temperature (black package) t a - ambient temperature ( c) 025507 5 100 125 i ceo - collector-emitter dark current ( a) 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 v ce = 10 v
10 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers black package (no -m suf?) pa ck ag e dimensions (through hole) package dimensions (surface mount) recommended pad layout for surface mount pa ck ag e dimensions (0.4 lead spacing) leadform (black package only) note: all dimensions are in inches (millimeters) 0.100 (2.54) typ 0.020 (0.51) min 0.350 (8.89) 0.330 (8.38) 0.270 (6.86) 0.240 (6.10) pin 1 id. 0.022 (0.56) 0.016 (0.41) 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.115 (2.92) 0.300 (7.62) typ 0?to 15 0.154 (3.90) 0.100 (2.54) seating plane 0.016 (0.40) 0.008 (0.20) lead coplanarity : 0.004 (0.10) max 0.270 (6.86) 0.240 (6.10) 0.350 (8.89) 0.330 (8.38) 0.300 (7.62) typ 0.405 (10.30) max 0.315 (8.00) min 0.016 (0.40) min 2 5 pin 1 id. 0.016 (0.41) 0.008 (0.20) 0.100 (2.54) typ 0.022 (0.56) 0.016 (0.41) 0.070 (1.78) 0.045 (1.14) 0.200 (5.08) 0.165 (4.18) 4 3 0.020 (0.51) min 1 6 seating plane 0.016 (0.40) 0.008 (0.20) 0.070 (1.78) 0.045 (1.14) 0.350 (8.89) 0.330 (8.38) 0.154 (3.90) 0.100 (2.54) 0.200 (5.08) 0.135 (3.43) 0.004 (0.10) min 0.270 (6.86) 0.240 (6.10) 0.400 (10.16) typ 0 to 15 0.022 (0.56) 0.016 (0.41) 0.100 (2.54) typ pin 1 id 0.070 ( 1.78 ) 0.060 ( 1.52 ) 0.030 ( 0.76 ) 0.100 ( 2.54 ) 0.295 ( 7.49 ) 0.415 ( 10.54 )
11 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers white package (-m suf?) pa ck ag e dimensions (through hole) package dimensions (surface mount) recommended pad layout for surface mount pa ck ag e dimensions (0.4 lead spacing) leadform (white package only) note: all dimensions are in inches (millimeters) 0.350 (8.89) 0.320 (8.13) 0.260 (6.60) 0.240 (6.10) 0.320 (8.13) 0.070 (1.77) 0.040 (1.02) 0.014 (0.36) 0.010 (0.25) 0.200 (5.08) 0.115 (2.93) 0.100 (2.54) 0.015 (0.38) 0.020 (0.50) 0.016 (0.41) 0.100 (2.54) 15 0.012 (0.30) pin 1 id seating plane 0.350 (8.89) 0.320 (8.13) 0.260 (6.60) 0.240 (6.10) 0.390 (9.90) 0.332 (8.43) 0.070 (1.77) 0.040 (1.02) 0.014 (0.36) 0.010 (0.25) 0.320 (8.13) 0.035 (0.88) 0.012 (0.30) 0.012 (0.30) 0.008 (0.20) 0.200 (5.08) 0.115 (2.93) 0.025 (0.63) 0.020 (0.51) 0.020 (0.50) 0.016 (0.41) 0.100 [2.54] seating plane pin 1 id 0.350 (8.89) pin 1 id 0.320 (8.13) 0.260 (6.60) 0.240 (6.10) 0.070 (1.77) seating plane 0.040 (1.02) 0.014 (0.36) 0.010 (0.25) 0.200 (5.08) 0.115 (2.93) 0.020 (0.50) 0.016 (0.41) 0.100 [2.54] 0.100 (2.54) 0.015 (0.38) 0.012 (0.30) 0.008 (0.21) 0.425 (10.80) 0.400 (10.16) 0.070 ( 1.78 ) 0.060 ( 1.52 ) 0.030 ( 0.76 ) 0.100 ( 2.54 ) 0.305 ( 7.75 ) 0.425 ( 10.79 )
12 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers ordering information carrier tape speci?ations (black package, no suf?) carrier tape speci?ations (white package, m suf?) black package part number example (no suf?) white package part number example (m suf?) description cny171s cny171sm surface mount lead bend cny171sd cny171sr2m surface mount; tape and reel cny171w cny171tm 0.4" lead spacing cny171300 cny171vm vde approved cny171300w cny171tvm vde approved, 0.4" lead spacing cny1713s cny171svm vde approved, surface mount cny1713sd cny171sr2vm vde approved, surface mount, tape & reel 4.0 0.1 1.55 0.05 user direction of feed 4.0 0.1 1.75 0.10 7.5 0.1 16.0 0.3 12.0 0.1 0.30 0.05 13.2 0.2 4.85 0.20 0.1 max 10.30 0.20 9.55 0.20 1.6 0.1 4.0 0.1 1.5 min user direction of feed 2.0 0.05 1.75 0.10 11.5 1.0 24.0 0.3 12.0 0.1 0.30 0.05 21.0 0.1 4.5 0.20 0.1 max 10.1 0.20 9.1 0.20 1.5 0.1/-0
13 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers marking information (black package non ? suf?) re?w pro?e (black package, no suf?) cny17-1 v xx yy k 1 2 6 4 3 5 de?itions 1f airchild logo 2d e vice number 3 vde mark (note: only appears on parts ordered with vde option ?see order entry table) 4 tw o digits year code, e.g., ?3? one digit year code for ? v ersion, e.g. ? 5t wo digit work week ranging from ?1 to ?3 6 assembly package code ? peak reflow temperature: 225 c (package surface temperature) ? time of temperature higher than 183 c for 60?50 seconds ? one time soldering reflow is recommended 215 c, 10?0 s 225 c peak ti me (minute) 0 300 250 200 150 100 50 0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 te mperature ( c) time above 183 c, 60?50 sec ramp up = 3 c/sec
14 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers marking information (white package m suf?) re?w pro?e (white package, m suf?) cny17-1 v x yy q 1 2 6 4 3 5 de?itions 1f airchild logo 2d e vice number 3 vde mark (note: only appears on parts ordered with vde option ?see order entry table) 4 single digit year code, e.g. ? 5t wo digit work week ranging from ?1 to ?3 6 assembly package code 300 280 260 240 220 200 180 160 140 120 100 80 60 40 20 0 c time (s) 0 60 180 120 270 260 c >245 c = 42 sec time above 183 c = 90 sec 360 1.822 c/sec ramp up rate 33 sec
15 www.fairchildsemi.com cny17x, cny17fx, moc810x rev. 1.0.6 cny17x, cny17fx, moc810x phototransistor optocouplers rev. i20 trademarks t he following are registered and unregistered trademarks fairchild semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. disclaimer fa i rchild semiconductor reserves the right to make changes without further notice to any products herein to improve reliability, function, or design. fairchild does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under it s patent rights, nor the rights of others. these specifications do not expand the terms of fairchild? worldwide terms and conditions, specifically the warranty therein, which covers these products. life su pport policy fa irchild? products are not authorized for use as critical components in life support devices or systems without the express written approval of fairchild semiconductor corporation. as used herein: 1. life support devices or systems are devices or systems which, (a ) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in a ccordance with instructions for use provided in the labeling, can be r easonably expected to result in significant injury to the user. 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. pr oduct status definitions definition of terms acex activearray bottomless bu ild it now coolfet cross volt dome ecos park e 2 cmos en signa fact fast fastr fps frfet fa ct quiet series gl obaloptoisolator gto hisec i 2 c i-lo im plieddisconnect in tellimax isoplanar littlefet microcoupler microfet micropak microwire msx msxpro ocx ocxpro optologic optoplanar pacman pop po wer247 po weredge po wersaver po wertrench qfet qs qt op t oelectronics quiet series rapidconfigure rapidconnect serdes sc alarpump silent switcher smart start spm stealth superfet supersot-3 supersot-6 supersot-8 sync fet tcm ti ny boost tinybuck tinypwm tinypower ti ny logic tinyopto tr utranslation uhc unifet ultrafet vcx wire ac ross the board. around the world. t he power franchise pr ogrammable active droop datash eet identification product status definition ad vance information formative or in design this data sheet contains the design specifications for product development. specifications may change in any manner without notice. pr eliminary first production this datasheet contains preliminary data, and supplementary data will be published at a later date. fairchild semiconductor reserves the right to make changes at any time without notice to improve design. no identification needed full production this datasheet contains final specifications. fairchild se mi c onductor reserves the right to make changes at any time without notice to improve design. ob solete not in production this datasheet contains specifications on a product that has been discontinued by fairchild semiconductor. the datasheet is printed for reference information only.

▲Up To Search▲

Price & Availability of MOC8104

	To Download MOC8104 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .